Fans and analysts often see different height listings for the same player and wonder which one to trust. That short gap can come up in casual comparison, team previews, and in quantitative models where inputs need to be consistent. This article reconciles the main listings for Stephen Curry and explains the practical steps you can take when a one-inch discrepancy appears. We focus on primary sources and the policy that shaped modern listings so you can decide reliably which value to use in reporting or modeling. The goal is to make a clear, reproducible choice and avoid hidden inconsistencies when combining datasets.

The NBA and Golden State Warriors list Stephen Curry at 6'2" under the barefoot verification standard.

Some international profiles list Curry at 191 cm, which commonly converts to 6'3" because of rounding or measurement context.

For most prop models the one-inch difference is low signal, but run a sensitivity test before changing a live model.

Quick answer: is Stephen Curry listed at 6'3" or 6'2"?

If you are adjusting inputs for a kevin durant player prop or any player-prop model and want a quick baseline, the most directly supported listing for Stephen Curry in 2026 is 6'2" as shown by the NBA player page.

This listing is visible on the official NBA player page, which reflects the league's current published height for Curry NBA player page

Some international competition profiles list Curry at 191 cm, which is often rendered as 6'3" because of conversion and rounding conventions FIBA Paris 2024 player profile

Quick verification checklist for height-based inputs

Bookmark the verification checklist in the "How to check primary sources and cite them correctly" section to make future checks faster and reproducible.

View FundedPlays Challenges

Short headline answer, in one line: use the NBA and team listings as the baseline for consistent models, and treat 6'3" references as alternate-format listings to normalize when combining sources. You can also check trusted databases such as Basketball-Reference when cross-checking entries.

How the NBA and other organizations measure player height

In 2019 the NBA started a verification process that asked teams to confirm player heights and ages and to publish barefoot measurements, a change intended to make listings more consistent and comparable across rosters; the original policy intent and reporting are summarized in the ESPN coverage of the change ESPN policy report

Other organizations sometimes use different conventions. Some international federations publish heights in centimeters and may round or include shoe height, which explains why a player can appear one inch taller in those listings. This difference in convention is routine and rarely reflects any deliberate discrepancy in the underlying measurement.

Official listings: what major sites and rosters show

The NBA player page lists Stephen Curry at 6'2", and that entry is the primary official listing used in many league and team contexts NBA player page

The Golden State Warriors roster also lists Curry at 6'2", which aligns the team roster with the league entry and supports using the 6'2" value when you need a single authoritative source Golden State Warriors roster

Is Stephen Curry 6'3" or 6'2" according to the most reliable sources?

The most reliable NBA and team sources list Stephen Curry at 6'2" under the barefoot verification standard; 6'3" appears in some international or centimeter-based listings due to conversion or rounding.

Widely used statistical databases such as Basketball-Reference list Curry at 6'2" as well, which generally follows the NBA/team standard for recorded player attributes Basketball-Reference player page

Major international or multi-sport sites can differ. For example, the FIBA Paris 2024 profile and some Olympics listings report Curry at 191 cm, illustrating the alternate convention for centimeter-based pages FIBA Paris 2024 player profile

Why some profiles say 6'3" - rounding and measurement context

One simple reason is unit conversion: 191 centimeters converts to about 6'3" when hours of rounding are used, so a centimeter-based listing often translates to the taller figure in feet and inches.

Another factor is whether measurements include shoes. The NBA's 2019 barefoot standard intentionally removed shoe height as a variable, while older or international sources sometimes reported players with shoes on, which explains many of the one-inch differences.

Does that one inch matter? When it changes comparisons and when it doesn't

For most fan comparisons and everyday discussion the difference between 6'2" and 6'3" is negligible. The weight of official NBA and team sources supports using 6'2" as the baseline for Curry in analytical work NBA player page

Funded Plays Challenges

View FundedPlays Challenges

However, some narrowly tuned analytics models or microsimulations that weight physical attributes heavily could be sensitive to a one-inch change, so modelers should document their choice and run sensitivity checks before switching a baseline height value.

How height factors into player props and market perception (kevin durant player prop)

Height is one of many inputs books and models consider for player props; its value is typically lower signal than recent minutes, matchup specifics, and shooting splits. When evaluating a kevin durant player prop, listed height is a backdrop data point rather than a line mover in most cases.

Sportsbooks and data providers feed models with many variables, and a single-inch difference in a listed height usually does not cause a measurable change in market pricing unless height feeds a chain of model adjustments that alter minutes or matchup expectations.

Practical example: Curry compared to similar guards and how you should record height

Take a simple side-by-side using NBA-listed heights: Curry at 6'2", a peer guard at 6'3", and another at 6'1". Recording every player using the NBA/team listing maintains internal consistency and removes the rounding noise that appears when mixing centimeter-based sources.

quick sensitivity test for height impact on a per-player model

interpret small outputs as low-signal effects

Use this one-line calculator approach to see whether a one-inch change meaningfully alters a derived metric. If the output change is negligible, prefer the NBA/team listing for consistency; if the output is not negligible, document why you moved to a shoe-inclusive or rounded value.

When combining datasets from the NBA and international competitions, convert all heights to the same convention before running model training to avoid hidden biases created by inconsistent inputs.

How to choose which height to use for betting models or analytics

Decision checklist: prefer NBA and team listings for baseline values, record your chosen source and retrieval date, normalize international entries to the same convention, and run a sensitivity check to confirm the height input does not materially change key model outputs ESPN policy report

Recommended source hierarchy is straightforward: NBA player page, team roster page, then trusted statistical databases such as Basketball-Reference, with international federation entries normalized if combined into a single dataset Basketball-Reference player page

Run a sensitivity check before changing a live model. Small tests on holdout data will reveal whether a height adjustment meaningfully shifts predictions or edge estimates.

Minimal 2D vector infographic tape measure conversion 191 cm to six feet three inches with barefoot versus shoe icon comparison kevin durant player prop

Common errors and misconceptions about listed heights

A common error is reading centimeter values and converting them imprecisely. 191 cm will commonly be reported as 6'3", but rounding rules vary and can cause apparent inconsistencies.

Another mistake is assuming that listed height equals wingspan or standing reach. Those are different measurements and must be obtained separately if they matter to your model or reporting.

Finally, relying on legacy pages that predate the 2019 verification change can introduce older, shoe-inclusive values into modern datasets; prefer current NBA/team pages where possible.

Scenarios where 6'3" versus 6'2" could change a decision

Edge cases include microsimulation models that weight height heavily when simulating matchups or when two players are nearly identical in all other dimensions; in those cases, a uniform one-inch difference can tilt a tight projected minutes or matchup advantage calculation.

For media reporting or public-facing profiles, writers sometimes use rounded or centimeter-converted figures like 6'3" for readability. When publishing, note the source and conversion method so readers can understand the choice.

Quick how-to: check primary sources and cite them correctly

Step 1, check the NBA player page first and record the retrieval date and URL; this is your first-tier source for listed height NBA player page

Step 2, check the team roster page and trusted databases such as Basketball-Reference to confirm consistency; if you see divergence, note whether the alternate source uses centimeters or predates the 2019 verification policy Golden State Warriors roster

Step 3, if you combine international entries, normalize centimeter values to your chosen convention and archive or timestamp the original pages so you can reproduce the data decisions later FIBA Paris 2024 player profile

Conclusion: practical takeaways for fans, bettors, and analysts

The evidence-based baseline for Stephen Curry in 2026 is 6'2" on NBA and Golden State Warriors pages, reflecting the league's barefoot verification standard; use those listings as your default when you need a single authoritative value NBA player page

When combining sources, normalize centimeter and legacy listings and run a sensitivity test to confirm whether the one-inch difference affects your models or reporting. Document your source choice and retrieval date for reproducibility. See Funded Plays for more on evaluation practices.

Appendix: references and where the evidence came from

NBA player page, confirms Curry listed at 6'2" in the league's official roster entries NBA player page

ESPN coverage of the NBA's 2019 verification policy explains the move toward barefoot listings and why modern entries aim for consistency ESPN policy report

FIBA Paris 2024 profile shows a 191 cm entry for Curry and demonstrates how international pages may use different conversion or rounding rules FIBA Paris 2024 player profile

Basketball-Reference lists Curry at 6'2" and is commonly used as a secondary database for statistical and roster checks Basketball-Reference player page

Olympics athlete pages also provide alternate-format listings that may differ from NBA convention Olympics athlete profile

Method note: how this article checked and interpreted height listings

We prioritized NBA and team pages as first-tier sources because of the 2019 verification policy and treated FIBA and Olympics entries as alternate-format listings to be normalized if combined ESPN policy report

When updating this page, re-check the NBA player page and team roster pages and record the retrieval date; if the league changes its policy or a roster is updated, note that change and the effective date in your documentation.

Why do some sources list Stephen Curry as 6'3" while NBA pages say 6'2"?

Different organizations use different measurement conventions; the NBA lists barefoot heights since 2019, while some international pages show centimeter-based or shoe-included values that convert to 6'3".

Should I change my player-prop model to use 6'3" instead of 6'2"?

Only if a sensitivity check shows the change meaningfully alters predictions; otherwise prefer the NBA/team listing for consistency and document the source.

Which source should I cite when publishing a height-based comparison?

Cite the NBA player page or the team roster as the primary source and include the retrieval date; if you use an alternate source, note how you converted or normalized the value.

If you keep one authoritative source and document your retrieval dates, you reduce the risk of introducing small but avoidable errors into player lists and models. A short sensitivity check will quickly show whether a one-inch change matters for your workflow. Use the checklist in the how-to section to bookmark the pages you rely on and to keep a timestamped record of any alternate-format values you accept.